FCH743

Description

FC-H743 is designed to support 8 Motors, and a DJI Air unit for Digital fpv.
FC-H743 brings the PX4 design paradigm is an FPV formfactor. Complete with JST Connectors for Solderless use.
Built on a compact platform of 37x37mm, this FC features dual Camera. 1 Analog and 1 Digital Camera
Full 8- Motor support, designed for X8 Configuration’s. An upgraded Black box size of 64MB. This Flight controller has been designed to take advantage of superior computing performance of 480Mhz CPU.
Equipped with 2MB Flash, can run BetaFlight, Ardupilot, INAV and Pixhawk full firmware version.
H743 RAW Computing power can do High DSP calculations required for RPM Filtering.

o TVS suppression circuitry,
Dual Current Spike Fuse to Protect the Flight controller from choppy spikes introduced ESC’s and USB.
FC-H7 industrial Grade variant used that can withstand -40 to +85 C temperature.
Industrial grade Temperature compensated Oscillator.
• 7XUARTS
o TELEMETRY UART
o GPS UART
o EXLRS UART
o SBUS Full UART/inverted UART
o UART PAD at bottom
o ESC Telemetry
o DJI Air unit Connector
• Dedicated I2C
o Dedicated I2C for Compass
o Airspeed Sensor
• Sensors
o High Grade Bosch IMU sensor (BMI-270)
o Infineon Barometer DPS368, Centimeter Level Precision.
o 50m water depth capable.
• Storage
o 64MB SPI-Flash
• OSD
o MAX7456 OSD.
o Dedicated Camera Control Pin.
• LED Strip
o 2x LED Strip.
• On Board ADC
o Voltage ADC meter
o Current ADC meter
• Power Supply
o We take pride in providing a high quality 3500ma Power supply.
o Capable of driving Camera and VTx along with RC and Telemetry Completely from Flight Controller.
o Texas instrument Power supply

• Motor Protocols
o DMA capable Hardware Design, Supports Dshot150/Dshot300/600/1200.
o Multishot, Oneshot Proshot.
o Bi-directional Dshot
• Tested with Ublox GPS and ExLRS RC Flawless operation.
• Ultralow Power
o FC-H7 is ultralow power, with the standby current consumption of just 110mA. It is one of the lowest powered Flight controllers.
o With Full firing on all peripherals, with GPS + RC Connected the max current consumption is 240ma.
• JST Connectors
o FC405 has total of 7 High Quality Molex Self Locking JST Connectors
 2x 8 pin ESC Connector 1.25
 1×6 pin GPS + Compass Connector
 3x 3 pin Connector for Camera_in, VTX & SBUS.
 2x 4pin Connector for ELRS and Telemetry.
• Firmware
o BetaFlight
 FC405 Has been tested with Betaflight and full configuration and Presets are available
o Ardupilot
 Ardupilot firmware latest version v4.6v has been successfully tested on FC405.