FC-405

Description

Built like a gun, the FC405 is designed to withstand high temperatures and voltage fluctuations. Key features include:
• TVS Suppression Circuitry: Protects the flight controller from voltage spikes.
• Current Spike Fuse: Safeguards against choppy spikes introduced by ESCs.
• Industrial Grade Variant: Operates reliably in extreme temperatures from -40°C to +105°C.

• All Pins are 5V tolerant.

5X UARTS

• TELEMETRY UART
• GPS UART
• EXLRS UART
• SBUS
• UART PAD at bottom

Dedicated I2C

• Dedicated I2C for Compass
• Airspeed Sensor.

Sensors

• High Grade Bosch IMU sensor (BMI-270)
• Infineon Barometer DPS368, Centimeter Level Precision
• Airspeed Sensor.

Storage

• 16MB SPI-Flash

OSD

• MAX7456 OSD.

On Board ADC

• Voltage ADC meter
• Current ADC meter

Power Supply

• We take pride in designing a high quality 3500ma Power supply.
• Capable of driving Camera and VTx along with RC and Telemetry Completely from Flight Controller.

Motor Protocols

• DMA capable Hardware Design, Supports Dshot150/Dshot300/600.
• Multishot, Oneshot Proshot.

Tested with Ublox GPS and ExLRS RC Flawless operation.
Ultralow Power

• FC405 is ultralow power, with the standby current consumption of just 90mA. It is one of the lowest powered Flight controllers
• With Full firing on all peripherals, with GPS + RC Connected the max current consumption is 240ma.

JST Connectors

• FC405 has total of 7 High Quality Molex Self Locking JST Connectors
• 1x 8 pin ESC Connector 1.25
• 1×6 pin GPS + Compass Connector
• 3x 3 pin Connector for Camera, VTX & SBUS.
• 2x 4pin Connector for ELRS and Telemetry

Firmware
BetaFlight

• FC405 Has been tested with Betaflight and full configuration and Presets are available

Ardupilot

• Ardupilot firmware latest version v4.6v has been successfully tested on FC405.

INAV

• Work in Progress.